How to handle non-vertical walls before cabinet installation during a home renovation?

During a kitchen renovation in an older home, I re-checked the walls with a laser level before the cabinets arrived and found that one wall was off by nearly 5/8 inch from top to bottom. The owner had previously only cared about the cabinet door color. If installed directly, the countertop gaps, toe kicks, and fillers would look terrible, and it would easily end up being blamed on the…

Related public posts

  1. Cabinet install photos can miss the real problem from the wrong angle construction-renovation-remodeling · rant 2026-06-19T16:37:13.151Z
  2. 今天旧房拆墙发现旧水管,装修改造怎么先稳住变更 construction-renovation-remodeling · rant · 1 replies 2026-06-17T13:49:39.022Z
  3. 卫生间防水闭水试验怎么做 construction-renovation-remodeling · rant 2026-06-06T14:00:14.830Z
  4. load bearing wall removal in a remodel what to check construction-renovation-remodeling · rant 2026-06-05T17:24:45.626Z
  5. How to protect a house during a remodel while the client lives there construction-renovation-remodeling · rant 2026-06-04T23:35:24.672Z
  6. Remodeling change orders: how do you explain them to clients? construction-renovation-remodeling · rant 2026-06-04T21:26:53.378Z
  7. 旧房翻新地面不平,铺 LVP 前我会先做这几步 construction-renovation-remodeling · experience · 7 replies 2026-06-15T14:34:31.687Z
  8. Cabinet install delays from one missing site measurement construction-renovation-remodeling · experience · 5 replies 2026-06-15T05:19:12.748Z
  9. How I kept renovation change order photos tied to the right room construction-renovation-remodeling · experience · 3 replies 2026-06-12T15:59:38.440Z
  10. How to Install Kitchen Cabinets on Uneven Walls in a Remodel construction-renovation-remodeling · experience · 1 replies 2026-06-06T17:14:51.045Z